LAN networking If you hope to add additional calculators to your network in the future, all you need are more Network interface Cards and 10BaseT cables. Simply plug the new network cards(s) into your computing machine an run a cable form the card to zoom of the hubs open styles. For even greater expandability, the hub can be joined, or uplinked, to other hubs. If you look closely at the turn on of the hub, you will see a port marked Uplink. To uplink a hub, simply insert a standard, straight-through 10BaseT cable between the Workgroup Hubs Uplink port and any of another hubs regular 10BaseT ports. A maximum of three hubs can be connected together.
For example, coherent most hubs, a 5-Port Hubs port number 5 and Uplink port are joined internally. This means that when port 5 is in use, the uplink port cannot be used, and vice-versa. If you plan on exploitation the uplink port, youll need to disconnect any cables that are connected to port 5. Setting up your network cards so...If you fate to get a full essay, order it on our website:
OrderCustomPaper.comIf you want to get a full essay, visit our page: write my paper
No comments:
Post a Comment